Anthem
|
PREAMPLIFIER SECTION |
|
Input Impedance |
20 k ohms |
|
Output Impedance
Main-RCA Other-RCA XLR |
300 ohms 51 ohms 600 ohms |
|
Rated Input |
2.0 Vrms |
|
Maximum Input
6-Channel S/E All Others |
3.0 Vrms 5.3 Vrms |
|
Rated Output (100k ohms load) |
2.0 Vrms |
|
Minimum Load |
5k ohms |
|
Maximum Output
RCA XLR |
6.3 Vrms 12.6 Vrms |
|
Headphone Output |
100 mW into 32 ohms @ 0.2% THD+N |
|
Volume Range
Main Zone 2/3 & Headphone |
-95.5 dB to +31.5 dB (0.5 dB resolution) -62.5 dB to +10.0 dB (1.25 dB resolution) |
|
Bass Management
High-Pass Slope (Small Speaker Setting) Low-Pass Slope (Subwoofer) Crossover Frequency (Adjustable in 5 Hz Increments) |
12 dB/octave (2nd order) 24 dB/octave (4th order) 25-160 Hz |
|
Tone Control
Bass Turnover Frequency Treble Turnover Frequency Range Filter Response Type |
200 Hz 2 kHz +/- 12 dB Shelf |
|
Channel Separation (at 1 kHz) |
82 dB |
|
Crosstalk Between Inputs (at 1 kHz) |
86 dB |
|
MAIN PATH (RCA & XLR Outputs, 48 kHz Sampling Rate for all Digital Signal Paths) |
|
Frequency Response and Bandwidth
6-Ch S/E and 2-Ch BAL Direct Inputs 2-Ch S/E Direct Inputs Analog-DSP Inputs @ 24/96 Digital Inputs @ 24/96 |
10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 130 kHz -3 dB 10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 120 kHz -3 dB 10 Hz to 20 kHz +0, -0.3 dB; 1 Hz to 37 kHz -3 dB 10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 39 kHz -3 dB |
|
THD+N (at Rated Input & Output)
6-Ch S/E Direct Input 2-Ch BAL Direct Input 2-Ch S/E Direct Inputs Analog-DSP Inputs @ 24/48 Digital Inputs @ 24/48 |
0.003% (80 kHz BW) 0.004% (80 kHz BW) 0.006% (80 kHz BW) 0.006% (AES17 filter) 0.004% (AES17 filter) |
|
IMD (CCIF @ 15 kHz & 16 kHz)
6-Ch S/E Direct Input 2-Ch BAL Direct Input 2-Ch S/E Direct Input Analog-DSP Inputs @ 24/48 Digital Inputs @ 24/96 |
0.001% 0.002% 0.003% 0.003% 0.001% |
|
S/N Ratio (ref. 2.0 Vrms A-weighted)
6-Ch S/E Direct Input 2-Ch Direct Inputs Analog-DSP Inputs @ 24/48 Digital Inputs @ 24/96 |
107 dB 106 dB 100 dB 104 dB |
|
XLR Pin Configuration |
Pin 1: Ground, Pin 2: Positive, Pin 3: Negative |
|
ZONE 2 and ZONE 3 PATHS |
|
Frequency Response and Bandwidth THD+N (at Rated Input & Output) IMD (CCIF at 15 kHz & 16 kHz) S/N Ratio (ref. 2.0 Vrms A-weighted) |
20 Hz to 20 kHz +0, -0.1 dB; 3 Hz to 140 kHz -3 dB 0.06% (80 kHz BW) 0.06% 97 dB |
|
RECORD PATH Analog to Digital Conversion S/N Ratio (A-weighted) |
100 dB |
|
FM TUNER SECTION |
|
Sensitivity
50 dB S/N IHF |
13 dBµ typ., 25 dBµ max. 10 dBµ typ., 20 dBµ max. |
|
S/N Ratio
Mono Stereo |
75 dB typ., 65 dB min. 69 dB typ., 60 dB min. |
|
Distortion
Mono Stereo |
0.2% typ., 1.0% max. 0.3% typ., 1.5% max. |
|
Stereo Separation |
40 dB typ., 25 dB min. |
|
Adjacent Channel Selectivity (+/- 400 kHz) |
70 dB typ., 60 dB min. |
|
Frequency Response |
25 Hz to 15 kHz +0. -2 dB |
|
VIDEO SECTION |
|
Bandwidth
Composite & S-Video Component: Green Component: Red Component: Blue |
6 MHz -0.02 dB; 70 MHz -3 dB 110 MHz -3 dB 90 MHz -3 dB 80 MHz -3 dB |
|
All video inputs and outputs are 75 ohms, 1.5 Vp-p. Component inputs and outputs work with any Standard requiring ultra-wide bandwidth (1080 p compatible), including Component-RGB, HDTV, line doublers, quadruplers, and scalers. |
|
HDMI™ – AVM 40 & AVM 50 ONLY |
|
Four HDMI™ inputs for digital video, digital audio, and multichannel high-resolution audio. |
|
DIGITAL AUDIO All digital audio inputs and outputs are to S/PDIF electrical (75 ohm, 0.5 Vp-p), S/PDIF optical (Toslink), or AES / EBU (110 ohms, 5 Vp-p) standards as appropriate. |
|
Processor |
FreeScale™ DSP 56367 150 MHz |
|
Audio Converters
Analog to Digital Digital to Analog |
AKM® AK5383 up to 24-bit/96 kHz AKM® AK4382 up to 24-bit/192 kHz |
|
CONTROL |
|
Infra Red
Carrier Frequency Max. 12V Supply Current Max. Emitter Current |
38 kHz 150 mA 100 mA per output |
|
RS-232 Connection |
DB-9F (straight-wired) |
|
RS-232 Pin Configuration (AVM 30 Side) |
Pin 2: Tx, Pin 3: Rx, Pin 5: Ground |
|
RS-232 Port Configuration |
Baud rate (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200), 8 data bits, 1 stop bit, no parity bits, flow control (RTS, CTS, NONE) |
|
Trigger Outputs
Polarity Max. Current @ 12 VDC Sequential Delay |
tip positive; sleeve negative 50 mA (Triggers 1,2), 200 mA (Trigger 3) 250 ms |
|
DIMENSIONS |
|
Width |
17-1/4 inches (43.8 cm) |
|
Height |
5-7/8 inches (14.9 cm) including feet; Rack-mounting: 3 rack units, without feet |
|
Depth |
14-1/4 inches (36.2 cm) |
|
| |