Overview
The No.326S features audio circuits, controls, architecture, and optional phono modules based on the critically acclaimed No.32. In fact, some audio circuits, such as the proprietary discrete volume attenuators, are identical to those found in the No.32. The No.326S is similar to the No.320S, but the main circuit board has been replaced with an Arlon board that responds more quickly to transient signals in both the high and low frequency regions. The Arlon also presents a deeper imaging that reveals more of the subtle nuances of a recording, imparts a more engaging texture to the high frequencies, and presents more of the ambience of a recording. All of these properties work together to yield a sonic signature that is wider, deeper, warmer, and clearly superior.
Specification
| Connector Complement: | 3 balanced (female XLR) stereo inputs - 4 single-ended (Mark Levinson-RCA) stereo inputs
1 balanced (male XLR) stereo main output
1 single-ended (Mark Levinson-RCA) stereo main output
2 single-ended (Mark Levinson-RCA) stereo record outputs
2 8-pin RJ-45 connectors for Link communication
1 6-pin modular RJ-11 connector for RS-232 communication
1 3.5mm mini-jack for trigger output
1 3.5mm mini-jack for ir input
1 phono ground terminal
1 IEC-standard AC mains connector |
| Crosstalk: | less than -94dBV, 20Hz to 20KHz (input terminated) |
| Dimensions: | Width: 17.75"
Height: 2.92"
Depth: 13.58" |
| Frequency Repsonse: | 10 to 40kHz, ±0.2 dB |
| Gain: | 0, 6, 12, or 18dB (line-level stage) |
| Gain Resolution: | 1.0dB increments up to 23.0dB on front panel display (-57dB)
0.1dB increments above 23.0dB on front panel display (-57dB) |
| Input Impedance: | 100k |
| Input Overload Gain Setting: | XLR Connectors/RCA Connectors +18dB 1.6V 0.8V +12dB 3.3V, 1.6V +6dB, 6.6V 3.3V 0dB 13.2V 6.6V |
| Notes: | Specifications are subject to change without notice.
Unless otherwise specified, these specifications indicate nominal values measured over a 20Hz to 20kHz bandwidth through balanced (XLR) connections. |
| Operating Voltage: | 100, 120, 220, or 230V AC power at 50 or 60Hz (preset)
|
| Power Consumption: | 50W maximum |
| Residual Noise: | 20Hz to 20kHz (input terminated less than -94dBV) |
| THD + Noise: | less than 0.001% |
| Volume Control Range: | 80.0dB (maximum) |
| Weight: | 30 pounds (14kg) |
About the brand
Today, more than three decades after the company's inception, Mark Levinson continues to expand the horizons of audiophiles at home and on the road as well as those of home theater enthusiasts with components and systems that define accuracy, reliability, and enjoyment. Mark Levinson. Since 1972. The same name. The same enduring standards. The same extraordinary level of satisfaction.
Warranty Information: Processors - 3 years, Players - 1 year, Amplifiers - 5 years. A valid serial number is required for warranty coverage.
Reviews
Mark Levinson
|
 |
